Home

The Alignment/Leveling Tool

This tool can be used on all of your scopes to easily get the crosshairs perfectly aligned as well as to precisely mount the sighting level. For best accuracy a scope needs to be positioned with its horizontal crosshair exactly parallel to the earth's surface at the same time that it is directly above the bore of the rifle.

The alignment/level tool is designed to work with horizontally split scope mounting rings such as Leupold’s. Other types of mounts may be more difficult depending on which surface you find and trust to be truly horizontal or perpendicular to the rifle bore and scope center lines plane. In most cases the alignment/leveling tool will provide the easiest, quickest, and most accurate means for postioning your scope and level.

 

Mounting Instructions

Alignment/Leveling Tool

Order Here

For more information contact:

Lyon Design & Production, Inc.

(541) 825-3392

info@lyon-inc.com

 

Note:

The alignment/leveling tool was assembled with the surface of the step (marked = in this photo) resting on a precise level surface plate. Therefore this surface is the one to have resting on any reference being checked. Either end of the fixture (marked T in the photo) can also be used as they are precisely perpendicular to the spirit level. (Do not use any other surface than those mentioned as they have not been calibrated to be level.)

 

 

Can be ordered seperately from the kit: $18.95 + $3.50 Shipping & Handling